| |
Solar Hot Water
Adding a solar hot water system to your house can save anyone who has an electric hot water heater at least 1/3 on their electric bill. |
|
|
 |
|
The solar hot water system contains two main components: a solar hot water collector placed on the roof and a new solar hot water tank. |
We use Chromagen collectors which are state of the art and absolutely the best in the industry. Chromagen was founded in 1962 and has been perfecting it’s collector since then. We ONLY install Chromagen collectors because they are simply the best. They come with a lifetime warranty.
-
Absorber Plate
Made of copper or aluminum sheet, laser or ultrasonically welded to copper tubes, ensuring high efficiency and durability.
-
Absorber Plate Coating
Selective black paint, black chrome or Ultra selective sputtered coating with excellent energy absorption and very low energy emission for high performance even in cooler climates.
-
Insulation
The absorber plate is encased in 23 mm rigid Polyurethane foam, with an option to additional layer of glass wool, retaining the collector’s heat.
-
Solar Glass Glazing
The single-pane 3.2-mm patterned and tempered solar glass has high solar transmittance of 91% and excellent durability.
-
Casings
A . Aluminum
All anodized aluminum extrusion casings are made of solid construction available in a natural or black color.
B . Galvanized steel casings are available in black, gray or white polyester paint finish. |
|
-
Tubing Grid
16mm or 8mm copper risers brazed to 28mm or 22mm copper manifolds with optimal low distribution
-
Piping Connection
Four 3/4” BSPP female brass adaptors or clear cut edge for connector brazing.
-
Back Plate
The back plate is made of black polypropylene sheet.
- Aluminum Foil
The aluminum foil, integrated to the insulation, acts as a barrier against out-gassing.
|
Call Today to Get Your
Free Home Energy Analysis
504.309.7340
19 Years Nationwide |
|
|
|
